TP 52

Price Euro €250,000 SOLD

Euro €250,000
This J/V designed, offshore ready TP52 is now for sale.
Design - Judel Vrolijk TP 52 (IRC Optimised 2016)
Built - 2007 (Full Carbon Composite, with NOMEX cores)
Builder - King Marine, Spain. Originally build as BRIBON for the King of Spain. She was a no-expense spared build from the outset.
LOA - 15.8m
Beam - 4.41m
Draft - 3.2m
Displacement - 7233kg, with 3892kg in bulb. Considered a very strong fighting weight under IRC.

During 2017/18 the boat was given a serious overhaul in just about every department, with the primary focus on making the boat both inshore and offshore capable.
With the list of successes - the boat clearly achieved its goal.

Recent Major works completed;
2016 - Full topside re-spray
2016 - New North sails inventory, to Beau Geste designs.
2016 - Updated electronics
2016 - New mast luff track allowing both mainsail cars and bolt rope configuration.
2016 - New Hall SCR Aerofil standing rigging.

2017 - Updated running rigging.
2017 - Non-skid cockpit floor repainted (July)
2017 - New offshire rasied hatch.

2018 - New EC6 carbon rigging (un-used)
2018 - New J/V designed rudder, built by Cookson Boats.
2018 - New B&G H5000 processor.
2018 - Improved waterproofing.

Further updates include;
Boom mods 3rd reef
Wifi, Panasonic Toughbook and Ipad
Expedition software with polar reference collections

All spin Sheets and two halyards replaced
New Doyle Cable-less Code 0

Boat stored indoors since October 2018 - All care has been taken detailing the inventory but confrmation is upon inspection of the yacht


Race Yachts are specialists in all performance yachts, whether it's a 100 foot super maxi or a Farr 30 they deal with it. With extensive experience in Boat Building, Professional Sailing and Sales & Marketing the team at Race Yachts are well equipped to get the job done right.
Connecting Buyers and Sellers in a worldwide market.
Special Presentation
Judel Vrolijk
King Marine
52' 0" - 15.85m
Keel / Ballast
Fin with Bulb (3892kg)
Hull Material
Carbon Fibre
Deck Material
Carbon composite
4JH4E 45 hp, Sail Drive ST 50 leg, folding Propeller
Engine Make
Fuel Type
Two blade folding prop
The galley is off to starboard and has a gimbling, 2-jet boil burner with various extras. Both sides in
the midships have extensive canvas storage bags. Boat has small carbon sink, with manual tap/hand pump.
Forward of the bulkhead is the Toilet on port side, with working seacock setup.
Safety Gear
Various Safety equipment to be viewed on inspection

Boat has 2 x electric bilge pumps with roving hose.
12 volt system
B&G H5000 processor.
Graphic and race displays.
Heel and Compass sensors,
B&G wand
5 x 20/20 mast displays.
B&G Runner load Displays
IPAD 2 Wireless for on Deck use in water proof case.
Simrad VHF
Garmin AIS
Sail Inventory
All 2016 sails by North NZ and Doyle NZ.
2018 sails by Doyle NZ.
Mast / Rigging
ROCKALL V is fitted with a 3-spreader carbon mast, built and designed by Southern Spars.
She is also fitted with a lightweight carbon, high aspect offshore boom, capable of three reefs.
The boat has a fitted carbon bowsprit, with the facility for a 2:1 tackline arrangement.
Included is a set of unused EC six carbon standing rigging
- Gorilla foil
- 2 x Masthead Halyards - 1 x LOCK
- 1 x Jib Halyard - LOCK
- 1 x FR0 Halyard - LOCK but runs off masthead lock.
- 1 x Gen Staysail Halyard
- 1 x Main Halyard - LOCK
- Topmast/running back stays.
- Solid Vang with spring loaded inner
- Adjustable mast step
- Hydraulic Outhaul system (System de-commissioned for offshore racing).
- Hydraulic Forestay control (System de-commissioned for offshore racing).
- Running rigging package (sheets and halyards) supplied with boat.
- Various snatch blocks
Deck Gear
Lewmar Carbon Pedestals x 2
Mainsheet : 60 3gpst, 3 speed x 2
Primaries: 60 3 gpst 3 speed x 2
Pit: 50 2 speed x 2
Runners: Harken 65 3 speed.
Spinlock Jammers for halyards and Harken Deck hardware for sheeting.
Rockall V has been super successful as an Offshore and inshore racer. She is seriously for sale and currently stored inside a shed in Hamburg Germany.

Contact us for more information

You may also be interested in